Interlocking blocks are a a cost-effective and sustainable alternative to the conventional brick and mortar masonry without changing the basics of the conventional building process. Made out of cement and fly ash along with rock dust slurry or metal chips, interlocking bricks are a great option for companies and individuals looking to build quick, long-lasting, and eco-friendly structures upto three storeys high.
Compared to regular concrete bricks, interlocking bricks allow for walls that are more resistant to shear, erosion, and natural disasters like cyclones, earthquakes, tsunamis and floods. High quality interlocking bricks are made of cement, sand and Stone dust mixed together in appropriate proportions. The required materials are batched and mixed proportionately. Once the required mix is prepared, it is then compressed to form bricks with desirable interlocking patterns. The compression is achieved by using hydraulic compression system. The bricks are then subjected to curing for about 7 days.
Aside from their strength, interlocking blocks also have the following benefits:
Minimal Material Cost – The interlocking technique enhances structural strength and reduces the need for mortar, which translates into lower material costs. Since there is no use of mortar in the construction process, the cost of buying cement, sand, mortar and stone dust can be essentially avoided. Fast Construction – An expert block layer team can lay up to 800 blocks per day which are equivalent to laying 2400 standard stock bricks per day, all with no post-construction work required on wall masonry. Versatile Construction Technique – Interlocking blocks are compatible with almost all window, door, slab and roofing systems that are used in conventional building. Easy Construction – Interlocking blocks are easy to lay, meaning that even unskilled labors can be trained to with them, with minimal effort Eco-friendly Construction – Locally available materials, which could are otherwise be wasted, are often used as raw materials for manufacturing interlocking blocks. This helps with local recycling and waste management efforts, and the process as a whole uses much less water compared to traditional brick laying as it requires much less mortar/slurry. Load Bearing And Framed Structures – Interlocking blocks can be made with high compressive strength for Load-bearing structures. The strength and density can be customized according to the varied fly ash suiting the technical specification for framed / multi-storied construction. Earthquake resistant - During earthquakes, there are various stresses acting on the structure. Conventional bricks are not fully equipped to transfer the seismic loads throughout the structure since the only medium of load transfer is the mortar. If the mortar fails then the whole structure fails under seismic forces. Interlocking bricks are an effective and proven earthquake resistant construction materials. The self locking pattern of the bricks enables the seismic forces to travel across the whole structure equivalently. Cooler interior temperatures - High compacted bricks generally result in higher density, which in turn converts itself into high thermal mass. As a result, walls made of high compacted bricks typically furnish warm interiors. Interlocking bricks are less heat intensive. Tests show that interlocking bricks provide a much cooler interior, reducing the need for ACs and resulting in lower energy consumption and increased cost savings.
Interested in learning more? Give one of these local blocks experts a call today!
Find below a list of the top
Interlock Block Manufacturers in Doha, Qatar:
- QATAR CLAY BRICKS CO
Location: ST 52, GATE 125, INDL AREA,
Phone: 44603124;44603487;44603157;55527606;55802394;55530161;74792427
Timings:7.00-12.00/2.00-5.00
Key Personnel:ENGR EL SAYED A M SAYEDEIN , MNGR
- AL ANDALUS FACTORY FOR CEMENT PRODUCTS
Location: BLDG 208, ST 37, ZONE 57, SALWA IND AREA,
Phone: 44501047;44501048;44501049
Timings:8.00AM-4.30PM
Key Personnel:YOUSEF MAJED SULEIMAN , Gen Mngr
- AL FANAN MARBLE GRANITE & CERAMIC CO
Location: SALWA RD,
Phone: 44683038
Timings:
Key Personnel:MORIS EID, SALES MNGR
- AL SEHMIAH CEMENT PRODUCTS
Location: ST 50, GATE 213, INDL AREA,
Phone: 44509900;44685056
Timings:7.00AM-3.30PM
Key Personnel:ABRAHAM K JOSEPH , GEN MNGR
BILAL K, PROJS MNGR
- QATAR PAVING STONES
Location: SALWA RD,
Phone: 44027111
Timings:7.00AM-3.00PM
Key Personnel:LIJO, SALES
LAIJU, SALES
MATTHEW VARGHESE, G M
Related Tags: Interlock Block Manufacturers in Doha Qatar |
Qatar Clay Bricks Co in Doha Qatar |
Al Andalus Factory For Cement Products in Doha Qatar |
Al Fanan Marble Granite & Ceramic Co in Doha Qatar |
Al Sehmiah Cement Products in Doha Qatar |
Qatar Paving Stones in Doha Qatar |
Qatar Directory on Facebook |
Qatar Directory on Twitter |
Qatar Directory Online
BLOCK MAKING EQUIPMENT
Find below a list of the top products suppliers of
Block Making Equipment in Doha, Qatar:
Related Tags:Block Making Equipment products in doha qatar |
AL NAHDA Products in Doha Qatar |
CADONA Products in Doha Qatar |
NUOVA BATTIPAV Products in Doha Qatar |
Qatar Directory on Facebook |
Qatar Directory on Twitter |
Qatar Directory Online